Page 1
This guide describes total operation features This guide describes total operation features and specifications. and specifications. User's Guide User's Guide T1_UG-EN_03...
Page 2
CAUTION Be sure to read this guide prior to use. After reading this guide, keep it in handy for future reference.
This guide describes the actions to take when a paper jam or other problem occurs. About This Guide This guide may not be reproduced in whole or in part without the permission of RISO KAGAKU CORPORATION. The contents of this manual may be changed without prior notice due to product improvements.
The procedures, screen shots, and illustrations in this guide assume that the high capacity feeder and high capacity stacker are connected. This guide also assumes that each function is set to the factory setting. The screenshots and illustrations in this guide may vary depending on the usage environment including connected equipment. VALEZUS T1200 User's Guide...
If the ventilation openings are blocked, the inside of the machine may become hot and a fire might occur. Do not place the machine in a dusty or humid location. Otherwise, a fire or an electric shock might occur. VALEZUS T1200 User's Guide...
Dust collected on these areas can result in power for operations, then turn off the main power switch. Next, unplug all the power fire. cords and contact your dealer or authorized service representative. Otherwise, a fire or an electric shock might occur. VALEZUS T1200 User's Guide...
Doing so may result in your fingers being caught while the double tray feeder moves. Caution! Hot surface Since the parts near the high temperature caution label may be heated and cause burns, do not touch the parts directly with your fingers. VALEZUS T1200 User's Guide...
Installation surface level: 2° or less Operate the machine under the following environment conditions. Temperature range: 15 °C - 30 °C (59 °F - 86 °F) Humidity range: 40% - 70% RH (non- condensing) VALEZUS T1200 User's Guide...
Provide sufficient space for the machine operations, replacing the consumables, and maintenance. High Capacity Feeder, Printer, and High Capacity Stacker • As seen from the front Units: mm (inch) • As seen from the side Units: mm (inch) VALEZUS T1200 User's Guide...
Page 12
Double Tray Feeder, Printer, and Double Tray Stacker • As seen from the front Units: mm (inch) • As seen from the side Units: mm (inch) VALEZUS T1200 User's Guide...
Always keep all the color ink cartridges in the machine. Do not leave the machine with the ink cartridges removed, even when not using the machine. VALEZUS T1200 User's Guide...
(12-lb bond - 56-lb bond) Weight Ream weight: 40 kg - 180 kg (88 lb - 397 lb) (duodecimo) Paper Type Plain paper, recycled paper Height up to 440 mm Maximum Load (17 5/16") (2 trays) VALEZUS T1200 User's Guide...
Page 15
Paper with a processed surface, such as thermal paper or carbon paper • Curled paper (3 mm (1/8") or more) • Paper with wrinkles • Bent paper • Torn paper • Paper with ripples • Coated paper such as art paper VALEZUS T1200 User's Guide...
Do not shake the ink cartridge. This can create bubbles, resulting in a deterioration in print quality. Do not add ink into the ink cartridge. Remove the ink cartridge from its plastic bag just before inserting it into the machine. VALEZUS T1200 User's Guide...
In the event of fire, use potassium carbonate mist, foam, powder, or a carbon dioxide fire extinguisher. Disposing of Used Ink Cartridges and Cleaning Tanks The ink in the cleaning tank cannot be used for printing. VALEZUS T1200 User's Guide...
Load the paper to be used for printing here. • You need to use the USB flash drives compatible with Mass Storage Class and • Use the standard tray for thick paper and file system format (FAT16, FAT32, exFAT). other special paper types. VALEZUS T1200 User's Guide...
Press this key to return the settings to their default values. • For specific instructions on how to register functions and settings, contact your • Only selected settings are reset. The other administrator. settings remain unchanged by this operation. VALEZUS T1200 User's Guide...
Page 20
This key lights up when this machine is in power saving mode. Pressing this key when it is lit makes the machine ready for operation. • Pressing this key when it is not lit makes the machine go into sleep mode. VALEZUS T1200 User's Guide...
Prepare a new ink cartridge for the color that flashes. • If you are not using RISO ink, the remaining amount of ink is not displayed. [Fiery] Button This button is displayed when using the print controller ComColorExpress FS2100C.
To use this function, contact our dealer or such as paper and ink. authorized service representative. Setting Buttons Use these buttons to set up the administrator menu functions. Buttons Use these buttons to scroll through the list. VALEZUS T1200 User's Guide...
Page 23
Touch [Paper Size]. the length. The [Paper Size] screen is displayed. Select a paper size and touch [OK]. Touch [Paper Type]. The [Paper Type] screen is displayed. VALEZUS T1200 User's Guide...
Page 24
Touch this button to display information on the connected equipment and its status. After that, when either of the following operations is performed, [Thickness] returns to the original setting: Selecting a paper size other than envelopes in [Standard] of [Paper Size] VALEZUS T1200 User's Guide...
To select a button on the touch panel, touch the button with your finger. This screen displays the license information of the Either a part of or the entire selected button will system used with this product. turn blue. VALEZUS T1200 User's Guide...
Page 26
• The current selected area is indicated by a flashing short line under numbers or letters. To switch the area, touch the area that you want to enter text in. VALEZUS T1200 User's Guide...
We recommend loading the feed trays with types of paper you will use most often. • Use the standard tray for the following types of paper: Thick paper and other special paper Preprinted paper Postcards Envelopes VALEZUS T1200 User's Guide...
Page 28
Move the stopper by holding both sides. Push the tray back into the machine. Load the paper. When using paper with different characteristics on the front and back sides, load the printing side face down. Do not load too many sheets. VALEZUS T1200 User's Guide...
Page 29
Preparation On the operation panel, check the tray settings. When you have switched to a different type or size of paper, update the feed tray settings. (p.21 "Changing the Paper Tray Setting") VALEZUS T1200 User's Guide...
It is recommended that you use one of the following types of ethernet shielded cables according to your network environment. Cat 5 (Cat 5e) cable for 100BASE network Cat 5e cable for 1000BASE network VALEZUS T1200 User's Guide...
Page 32
For the printing method and settings of print controller, see the user’s guide for the print controller. • You cannot change the paper size during a print job. When using different size of paper, take out the printed papers from the stacking tray. VALEZUS T1200 User's Guide...
• Touch [Select All] to select all jobs in the list. You can check the document/job name, owner name, number of printed copies ( ), print date/time ( ), and processing result. VALEZUS T1200 User's Guide...
Contact your administrator for details. [Paper info] Screen Touch [Paper info] to display the tray which is feeding paper. When you want to add paper during printing with the machine, check the available tray on this screen. VALEZUS T1200 User's Guide...
You can check the paper settings on the [System Info] - [Consumables] screen. Also, make sure correct paper is inserted in the specified feed tray, and the remaining amount of ink is sufficient. On the print controller, Click [Start]. VALEZUS T1200 User's Guide...
If a paper jam occurs, open this cover and remove the jammed sheet. Use this guide when printing on an envelope. Depending on the type of envelope being used, it is necessary to adjust the angle of inclination. VALEZUS T1200 User's Guide...
Page 37
"When Setting a Large the guides in position. Amount of Paper at Once" (p.36). When loading envelopes Be sure to load envelopes with their flaps open and their bottom side entering the machine first. VALEZUS T1200 User's Guide...
Page 38
Load the rest of the paper. Procedures after all of the paper has been loaded are the same as when loading the paper for normal operation. Perform step 4 and 5 described in "Loading the Paper in the Standard Tray" (p.35). VALEZUS T1200 User's Guide...
Page 39
• The position to which the standard tray is lowered can be conveniently configured to suit scenes of use. To change the position to which the standard tray is lowered, contact your administrator. VALEZUS T1200 User's Guide...
You cannot print with the cover open. Corrugators • Be sure to use the dedicated carriage Set the corrugators to feed paper smoothly according with the high capacity stacker. to the paper type and align printouts to stack neatly. VALEZUS T1200 User's Guide...
Page 41
• When removing only the printouts Printouts can be removed without pulling out the dedicated carriage. You can remove printouts without waiting for the stacking tray to lower to the bottom. VALEZUS T1200 User's Guide...
Page 42
Open the right cover of the high capacity stacker. Close the right cover of the high capacity stacker. VALEZUS T1200 User's Guide...
Page 43
This will allow you to pull out the entire carriage and remove the paper. Close the right cover of the high capacity stacker. VALEZUS T1200 User's Guide...
Page 44
Maintenance Mode Settings Paper Guide Control Adjust the position of the paper guides. For more information, see "Paper Guide Control" (p.54) in the "Appendix". VALEZUS T1200 User's Guide...
A4 (Letter). from becoming misaligned. Turn the knob at the tip counter-clockwise to unlock the guide. Move the guide to align with the paper stack and turn the knob clockwise to fix the paper guide in position. VALEZUS T1200 User's Guide...
Page 46
Label Details The location of the label may be high temperature. Contact may result in burn. Your fingers may become caught while the double tray feeder moves or when you load paper in the standard tray. VALEZUS T1200 User's Guide...
Page 47
Spread the paper feed guide (end). Set the remaining paper. Turn the knob of the paper feed guide (end) counterclockwise to unlock and spread the guide. VALEZUS T1200 User's Guide...
Page 48
Adjust the side air adjustment Attach the feed extension plate levers (both sides). stoppers. (Thumbscrew M3x6; 4 For general use, set to "NORMAL". For thick paper pcs.) and special paper, set to "CARD". VALEZUS T1200 User's Guide...
Page 49
Hold the button down until the tray reaches the desired position. Press The standard tray will be lowered to the position specified by the quickly administrator. release • The standard tray is also automatically lowered when all paper is removed. VALEZUS T1200 User's Guide...
Open this cover when removing printouts, setting the Corrugators carriage in position, or when removing paper jams. Set the corrugators to feed paper smoothly according Stacking Tray to the paper type and align printouts to stack neatly. Printouts are output to this tray. VALEZUS T1200 User's Guide...
Page 51
Lift the front corrugator while stacker. pressing it toward the machine (to the left). Similarly lift the back corrugator while pressing it toward the machine (to the left). VALEZUS T1200 User's Guide...
Page 52
Printouts can be removed without pulling out the dedicated carriage. You can remove printouts without waiting for the stacking tray to lower to the bottom. Pull out the carriage along with the stacking tray on it. VALEZUS T1200 User's Guide...
Page 53
This will allow you to pull out the entire carriage and remove the paper. Close the right cover of the double tray stacker. VALEZUS T1200 User's Guide...
Page 54
Align the end of the stacking tray with the two screws at the base of the handle on the carriage. Set the carriage by inserting its protrusions into the holes in the stacking tray. VALEZUS T1200 User's Guide...
[Normal Cleaning] The [Jogger Setting] screen is displayed. Cleaning to prevent clogging of the ink heads. [Strong Cleaning] Touch [ON]. Strong cleaning performed when the ink head has clogged. Touch [OK]. Touch [Maintenance] on the [Home] screen. VALEZUS T1200 User's Guide...
The adjusted value will also return to 0 mm when the [Power] key on the operation panel is pressed to restart the unit, the [Reset] key is pressed, or when the paper size has been changed. Touch [Close]. VALEZUS T1200 User's Guide...
Page 57
Affix the removed cap on the old ink cartridge. Insert the new ink cartridge. Position the ink cartridge so that the ▲ mark faces upward, and insert it until it stops. Close the front cover. VALEZUS T1200 User's Guide...
Simplex: 88 ppm Duplex: 42 sheets/minute Ledger Simplex: 86 ppm Duplex: 42 sheets/minute Maximum: 297 mm × 432 mm (11 11/16" × 17") Paper Size Feed Tray Minimum: 182 mm × 182 mm (7 3/16" × 7 3/16") VALEZUS T1200 User's Guide...
Page 59
Max. 68 dB (A) A4-LEF (Simplex) at the maximum print speed / Operating Noise Plain paper (64 g/m (17-lb bond)) Temperature: 15 ºC - 30 ºC (59 ºF - 86 ºF) Operating Environment Humidity: 40% - 70% RH (non-condensing) VALEZUS T1200 User's Guide...
Page 60
One gigabyte (GB) is calculated as 1,073,741,824 bytes. LEF stands for "Long edge feed". When setting [Power Consumption (in Sleep)] to [Low] With the cover of each part open and the operation panel in the upright position. VALEZUS T1200 User's Guide...
Page 61
* The pollution degree of the usage environment due to dirt and Safety Information dust in the air. Degree "2" corresponds to a general indoor environment. Without printing operation When setting [Power Consumption (in Sleep)] to [Low] VALEZUS T1200 User's Guide...
Page 62
Height up to 110 mm (4 11/32") for A5, postcards, envelopes, non-regular size paper Not applicable to A5, postcards, envelopes, non-regular size paper, etc. Without printing operation When setting [Power Consumption (in Sleep)] to [Low] VALEZUS T1200 User's Guide...
Page 63
Safety Information The pollution degree of the usage environment due to dirt and dust in the air. Degree "2" corresponds to a general indoor environment. Without printing operation When setting [Power Consumption (in Sleep)] to [Low] VALEZUS T1200 User's Guide...
Page 64
Degree "2" corresponds to a general indoor environment. Height up to 110 mm (4 11/32") for A5, non-regular size paper Not applicable to A5 or non-regular size paper Without printing operation When setting [Power Consumption (in Sleep)] to [Low] VALEZUS T1200 User's Guide...
Use the ink cartridge within approximately 24 months from the date of manufacture (when preserved under room temperature). For optimal printing quality, we recommend that you use the ink cartridge as soon as possible after purchase. You can find the date of manufacture on the ink cartridge. VALEZUS T1200 User's Guide...
Page 66
The user is cautioned that unauthorized changes or modifications not approved by RISO could void the user's The user is cautioned that unauthorized changes or modifications not approved by RISO could void the user's...
Page 67
This product may contain certain substances which are restricted when disposed. Therefore, be sure to consult your contracted service dealer. your contracted service dealer. your contracted service dealer. your contracted service dealer. RE directive Class1 device RE directive Class1 device VALEZUS T1200 User's Guide...
Page 68
The purpose of the "e-waste Rule" is to reduce waste and ensure Electrical Equipment is recycled at the end of life. RISO declares our products comply with the "India E-waste Rule" and prohibits use of lead, mercury, hexavalent RISO declares our products comply with the "India E-waste Rule" and prohibits use of lead, mercury, hexavalent RISO declares our products comply with the "India E-waste Rule"...
Need help?
Do you have a question about the VALEZUS T1200 and is the answer not in the manual?
Questions and answers