3-6-2. Condense edit mode
Entering Condense Edit Mode
1
Selecting the Edit Point (Sewing
2
Start/Sewing End)
To change a set value
3
Setting Confirmation
4
Exiting Condense Edit Mode
5
Press and hold the key on the Home screen to switch to the Condense
Edit mode.
Press
and
Press the key in the fourth row to select "" (sewing start side) or ""
(sewing end side).
and pitch.
・ Set the number of stitches (00 to 12) with the keys of the 1st and 2nd
columns.
・ Use the key in the fourth row to set the sewing direction (0: forward,
1: reverse).
・ Use the key to set the pitch (0.0 to 5.0).
When you have finished making sets, press the key to confirm. Returns
to " " or " ".
When the setting is completed, press the key to return to the home
screen.
Press the key to display the number of stitches, sewing direction
S-7180A
3. Operation panel
29