Care - Brother S-7180A Instruction Manual

Single needle direct drive lock stitcher with thread trimmer, electric feeding system and presser foot lifter
Table of Contents

Advertisement

4. Care

4. Care
Turn off the power switch before starting work.
If you step on the treadboard accidentally, the sewing machine may operate and cause injury.
When handling lubricating oil or grease, use protective goggles or gloves to avoid contact with
your eyes or skin. Doing so may cause irritation.
Do not swallow or eat lubricating oil or grease. Diarrhea and vomiting may occur.
Keep it out of the reach of children.
When tilting the sewing machine head, fix it so that the table does not move.
Movement of the table may cause injuries such as pinching the foot.
Use both hands to tilt or pull back the machine.
If you do so with one hand, your hand may slip due to the weight of the sewing machine and cause
injuries such as injuries.
To maintain the function of this machine and to use it for a long time, perform maintenance daily as follows.
Also, if the machine has not been used for a long time, perform the following maintenance before using the machine.
56
Note
1. When the oil level drops below the baseline of the oil
window, be sure to supply oil.
Lower
2. Return the machine head.
3. Replace the needle if it is bent or the needle tip is crushed.
4. Check that the needle thread is correctly threaded.
5. Perform a trial sewing.
S-7180A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S7180a-815

Table of Contents