Brother S-7180A Instruction Manual page 56

Parts
Num Item
ber
P131 Invalid
Condense pitch setting with
P132
handy switch
P133
~
Invalid
P137
Duty at presser foot
P138
lowering (%)
Delay time for presser foot
P139
lowering (ms)
P140
~
Invalid
P143
Positive pitch compensation
P144 at high speed (1000 sti/min
or higher)
Reverse-pitch compensation
P145 at high speeds (1000 sti/min
or higher)
P146
~
Invalid
P153
Final sewing condensation
P154
sewing speed
P155
~
Invalid
P164
P165 Bobbin thread counter
Initial
Range
value
Pitch of condensation stitching
0-5.0 2.0 ※It is enabled when the handy switch operation is set to
Decreasing the value will make the sound weaker and
0-100 2
lower.
Increasing the value delays the downward movement.
0-200 8
(P138 and setting)
-100~100 -020 Increasing the value increases the pitch.
-100~100 -020 Increasing the value increases the pitch.
100-2000
1000 Final sewing condensation sewing speed
0:The bobbin thread counter is not counted.
1:Increment the bobbin thread counter.
2:Decrement the bobbin thread counter.
0-4 0
3:The bobbin thread counter is incremented. When the
4:Decrement the bobbin thread counter. When it reaches 0,
"E51" is displayed and sewing stops.
S-7180A
Description
condensation sewing.
When the upper limit (P166) is reached, the bobbin
thread counter returns to 0.
When it reaches 0, the bobbin thread counter returns to
the upper limit (P166).
upper limit (P166) is reached, "E51" is displayed and
sewing is suspended. Press the key to clear the bobbin
thread counter and cancel the error.
3. Operation panel
47