LABORIE NXT Go Owner's Manual page 68

5. To incorporate selected images into the report, in the Configuration Settings panel, expand Report content.
Select the Video Images option checkbox and then click Apply Changes to add this feature to the report.
Sending Reports to EMR
Open the report from the Patients section or from the Reports workflow step and then, on the report ribbon bar, click
the Send to EMR button (
to EMR button is clicked, Synergy validates whether the EMR service is running. If the service is running, Synergy will
send the report to the EMR system. If the EMR service has stopped, Synergy will display a notification message. All
studies in Synergy can be sent to an EMR system if an EMR license is active.
Synergy displays a progress indicator while waiting for acknowledgement from the EMR system. Synergy will wait
10 seconds and then display a message asking whether you want to continue waiting. This 10-second wait time is
configurable and can be increased from within the Synergy application configuration file if needed. After 60 seconds
from the time the report was sent to EMR, the process will timeout and display an Export Failed message box
(Figure 4-37) if no acknowledgement had been received from EMR system.
NOTE
The Send to EMR button will not be accessible when using the Preview Changes feature to view report
configuration. To access the Send to EMR button, in the report Configuration Settings panel, click Apply
Changes.
62
Figure 4-36: Video Panel—Image Selection
). This icon will be visible only if the user has an EMR license enabled. When the Send
Figure 4-37: EMR Sending Status
Laborie NXT Go Owner's Manual LBL-00145 [E]