LABORIE NXT Go Owner's Manual page 58

Figure 4-23: Edit Control Panel Button
5. To implement all changes to the custom workflow, at the top of the Workflow Configuration window, click OK.
Accessing Hardware Channels
To access hardware channels, on the title bar, click the Settings icon ( ) and then click Workflow > Editor. Select the
required workflow and then navigate to the Channels tab.
If hardware channels are not set correctly, a red exclamation mark icon will appear on the Channels tab, as shown in
Figure 4-24.
Figure 4-24: Workflow Configuration with Hardware Channel Error
To set hardware channels, first ensure that you select the required Workflow option from the Workflow Steps drop-
down menu. Click the Channels tab and confirm the presence of all desired phases. Click the Set Default Hardware
Channels button. Click OK to save the changes and proceed to start the study.
52 Laborie NXT Go Owner's Manual LBL-00145 [E]