LABORIE NXT Go Owner's Manual page 56

■ Adjust the Fluid Density by typing a new value. The Fluid Density setting is available in the Filling, Voiding,
and UPP phases. If you are updating Fluid Density settings, be sure to update them in all relevant phases.
You can change the fluid density during a study by using the Change Infusion Fluid button to fluid
densities previously saved to the workflow. Click the Fluid Density drop-down menu to view previously
saved fluid densities.
c. The Channels tab provides settings for hardware channels. Refer to the section
Channels"
d. On the Event Display tab, you can select how study events are recorded and displayed. Specify which
events to include in the event summary by selecting the corresponding checkboxes. You can view the
event summary in the Review and Report phases of the completed study. To set the graph display options
for event markers, use the drop-down menu provided. You can adjust event marker settings to Off,
Normal, or Minimal.
3. In the Workflow Steps list box, select Questionnaire or Review. On the Settings tab, you can enable or disable
automatic execution.
4. In the Workflow Steps list box, select Report. To customize Landscape Graph Scaling settings, select scaling by
Number of Pages or Time per Page.
5. Click OK to save the workflow.
Workflow Step Settings Tabs
The following settings tabs are available under the Procedure Workflow Step:
•
Global: Graph Settings, Channel Settings, Other Settings, EMG Settings, Video Settings, Profile Settings
•
Channels: Channel Name, Channel Position, Channel Type, Unit, ScaleMax, ScaleMin, Color, Hardware channel,
Chartdown Sampler
•
Phases: Phase Name, Visible Channels, Channel Values Shown Separately, Workflow Additional Configuration
Items, Additional Status Bar Items, Fluid Density Settings, Control Panel
•
Events Display: Select Event Names for inclusion in the Event Display and adjust Marker settings
The following settings tab is available under the Questionnaire Workflow Step:
•
Settings: Automatically Execute Questionnaire
The following settings tabs are available under the Report Workflow Step:
•
Settings: Silent Report Execution, Landscape Graph Scaling
The following settings tabs are available under the Review Workflow Step:
•
Settings: Automatically Execute Review, Control Panel
Customizing the Control Panel
The control panel is a customizable space available in each study phase window. It provides control buttons that
allow you to place study markers, control the pump, and perform other tasks. Buttons available in the control panel
are standardized per study phase for default workflows. You can customize buttons per study phase using custom
workflows.
IMPORTANT
Workflows cannot be reconfigured while a study is in progress. All workflow settings must be adjusted
prior to starting a study.
50
on page 52.
Laborie NXT Go Owner's Manual
"Accessing Hardware
LBL-00145 [E]