Touch Pad / Touchscreen (Only For Models With Touchscreen) - Panasonic Toughbook CF-29LCQGCBM Reference Manual

Panasonic toughbook cf-29lcqgcbm: reference guide
Hide thumbs Also See for Toughbook CF-29LCQGCBM:
Table of Contents

Advertisement

Dealing with Problems (Advanced)
Disk Operations
How to format a floppy disk is unclear
Unable to read/write to the hard disk
When the previous item is not the
cause

Touch Pad / Touchscreen (only for models with touchscreen)

The cursor cannot be controlled
properly
Unable to input using the touch pad
Unable to point correctly with the
stylus included with the computer
Unable to input by touching the display
Format the floppy disk using the following procedure.
Right-click [My Computer] in [start] and select [3 1/2 Floppy (A:)], then select
[File] from the menu and select [Format]. Confirm the disc capacity and the
format type, then select [Start] to begin the formatting.
Your drive or file may not have been properly set.
Check to see if the hard disk is full. If it is full, delete unnecessary files.
You cannot use a hard disk drive for which [Enable] has been selected in the
[Hard Disk Lock] setting of the Setup Utility by another computer.
Your hard disk content may be corrupted. Contact Panasonic Technical
Support.
Try testing another drive or media.
If you are using an external mouse, ensure that the external mouse has been
connected correctly.
Restart the computer by using the keyboard.
, U, and select [Restart] with R.)
(Press
If the computer does not respond to keyboard commands, read "No response"
(
page
137).
Has the Setup Utility been used to set [Touch Pad] to [Enable]?
When external mouse drivers are installed (e.g., IntelliMouse), the touch pad
may not be used.
Has the touch pad driver been properly installed?
As a result of the physical characteristics of the touchscreen, sometimes the
position of the stylus does not match the position of the cursor on the screen.
This is not a malfunction. Perform [Calibration]. (
Has the Setup Utility been used to set [Touchscreen] to [Enable]?
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable
to be used. Reinstall the touchscreen driver.
Has the touchscreen driver been properly installed?
135
page
19)

Advertisement

Table of Contents
loading

Table of Contents