Panasonic Toughbook CF-29LCQGCBM Reference Manual page 90

Wireless LAN
The Wireless LAN Switch icon (
LAN is on or off. The icon will not change even when 802.11a is enabled or
disabled.
If 802.11a is enabled or disabled while the computer is connected to an
802.11b/g access point, the connection to the access point will be temporarily
interrupted.
In addition to using the Wireless LAN Switch, you can also change the setting of
the wireless LAN standard ([Wireless Mode]) by the following procedure:
A
Select [start] - [Control Panel] - [Performance and Maintenance] - [System]
- [Hardware] - [Device Manager].
B Double-click [Intel(R) PRO/Wireless...] at [Network adapters].
C Select [Advanced], and then select [Wireless Mode] in [Property].
D
Remove the check mark from [Use default value], and select the settings.
(E.g., [802.11a and 802.11g])
E Select [OK].
Note that when 802.11a is enabled/disabled by selecting the wireless LAN
Switch after settings have been changed using "Device Manager", communica-
tions using the following standards will be conducted.
Settings in Device Manager
[802.11a, 802.11b and
802.11g] or [802.11b and
802.11g]
[802.11g only] or [802.11a
and 802.11g]
[802.11a only] or [802.11b
only]
Turning On/Off Wireless LAN
1
Select the Wireless LAN Switch
or ) indicates whether the wireless
Settings in Wireless LAN Switch
When 802.11a is
enabled
a+b+g is enabled
a+g is enabled
a is enabled
on the taskbar.
( or )
90
When 802.11a is
disabled
b+g is enabled
g is enabled
b is enabled