Panasonic Toughbook CF-29LCQGCBM Reference Manual page 92

Wireless LAN
Enabling/Disabling 802.11a
1
Select the Wireless Switch Utility icon
2
To enable 802.11a:
A select [802.11a Enabled].
To disable 802.11a
A select [802.11a Disabled].
To use 802.11a, turn wireless LAN on.
The Wireless Switch Utility icon (
LAN and Bluetooth (only for models with Bluetooth) are on or off. The icon will
not change even when 802.11a is enabled or disabled.
If 802.11a is enabled or disabled while the computer is connected to an
802.11b/g access point, the connection to the access point will be temporarily
interrupted.
<For models with wireless LAN and without Bluetooth>
Turning On/Off Wireless LAN
1
Fn F8
Press + .
is displayed in the middle of the screen when the wireless LAN is turned on.
is displayed in the middle of the screen when the wireless LAN is turned off.
NOTE
You can also turn on/off wireless LAN by following the procedure below.
A Select the Wireless Switch Utility icon (
B
Select [Wireless LAN ON] or [Wireless LAN OFF].
(
:
or
or
92
on the taskbar.
or )
) indicates whether the wireless
) on the taskbar.