Connecting Peripherals - Panasonic Toughbook CF-29LCQGCBM Reference Manual

Panasonic toughbook cf-29lcqgcbm: reference guide
Hide thumbs Also See for Toughbook CF-29LCQGCBM:
Table of Contents

Advertisement

Dealing with Problems (Advanced)
Networking: Wireless LAN (only for models with wireless LAN)
Cannot enable/disable IEEE802.11a
using the Wireless Switch Utility

Connecting Peripherals

An error occurs while installing the
driver
Your peripheral does not work
External mouse or trackball connected
to the external keyboard/mouse port of
the port replicator does not work
If you have uninstalled Intel(R) PROSet/Wireless Software, log on to Windows
with the administrator authority in order to enable/disable IEEE802.11a.
When you install the driver for a PC Card or peripheral device, be sure to use a
driver that is compatible with the operating system. If you use an incompatible
driver, malfunction may occur. For information on drivers, contact the
manufacturer of the peripheral device you purchased.
Before connecting a peripheral, change the multimedia pocket device in
accordance with the media in which the driver of the peripheral exists. Once a
screen to install a driver is displayed, the multimedia pocket device cannot be
recognized even if it is properly installed.
Make sure a driver is installed.
Contact the manufacturer of the product.
When operation resumes from the standby or hibernation mode, devices such
as a mouse, modem or PC Cards may not function properly. In such cases,
you will need to restart your computer or reinitialize the individual devices.
When
is displayed in the Device Manager, try removing and inserting the
device once more. If the problem persists, restart the computer.
Depending on the device connected, the computer may not recognize when the
device is connected or disconnected, or the device may not operate properly.
Use the following procedure:
A
Select [start] - [Control Panel] - [Performance and Maintenance] -
[System] - [Hardware] - [Device Manager].
B
Select the applied device, and remove the check mark for [Allow the
computer to turn off this device to save power] in [Power
Management]. (This item may be unavailable for some types of
devices.)
page 13
131

Advertisement

Table of Contents
loading

Table of Contents