Setting Port Replicator - Panasonic Toughbook CF-29LCQGCBM Reference Manual

Port Replicator
Setting the Port Replicator
The serial port B of the port replicator cannot be used with the default settings. To be able to
use the serial port B of the port replicator, be sure to follow the steps below.
1
Run the Setup Utility. (
2
Select [Advanced] menu and then set [Serial Port B] to [Enable] or
[Auto].
3
F10
Press . At the confirmation message, select [Yes] and press
Enter
.
The computer will restart.
page 98)
70