Panasonic Toughbook CF-29LCQGCBM Reference Manual page 79

Modem
Ring Resume Function
Enabling the Ring Resume Function
<Modem-on-Hold function>
The modem of this computer has Modem-on-Hold function, which allows you to
receive an incoming call and stay connected to the internet (Call-Waiting service from
your phone company is required. Your Internet Service Provider (ISP) must also
support V.92).
To use this function:
A
Select [start] - [Run], input [c:\util\drivers\modem\ltmoh.exe] and then select
[OK].
B
Select on the taskbar and make settings.
With this function, if the telephone that is connected to the modem rings in the standby mode,
the power of the computer automatically switches ON.
This function is convenient when using automatic information receiving applications such as
a FAX application.
When using this function, it is necessary to run a software application able to maintain the
condition to receive telephone calls and to return the computer to the original condition after
a call. For further details, refer to the operating instructions provided with software
applications.
A
Select [Device Manager] in [start] - [Control Panel] - [Performance and
Maintenance] - [System] - [Hardware], and then select the internal modem
from [Modems].
B Select [Power Management], add the check mark for [Allow this device to bring
the computer out of standby], then select [OK].
CAUTION
When using this function, it is recommended that the AC adaptor be connected to the
computer.
79