Panasonic Toughbook CF-29LCQGCBM Reference Manual page 61

SD Memory Card Security Function
To use when logging on to Windows
The Windows logon user name and password set in [Control Panel] are registered
in the SD Memory Card.
After making this setting, the following functions will be disabled.
Displaying the Welcome screen
The Fast User Switching function
Remote desktop connection
A Add the check mark for [Use when logging on to Windows] (C) and select
[Next].
B
Select [Restart the computer after entering settings], then select [Finish].
C
Set the Windows logon user name and password.
Enter the user name, then press Tab.
Enter the password, then press Tab.
Reenter the password for confirmation.
[Do not check the user name]
When you do not add the check mark for [Do not check the user name]
(factory setting), the user name will be registered on the SD memory card
after confirming whether or not the input user name has been set on this
computer.
When you add the check mark for [Do not check the user name], any user
name will be registered on the SD Memory Card.
For example, if different user names have been set on multiple computers, as
in the case of a company, it requires a lot of work to register the user name
on each individual SD memory card for each computer.
If the check mark is on, user names for other computers can be registered on
the SD memory card.
• When user names for other computers have been registered:
When restarting the computer after completing the settings, enter the
Windows user name and password to log-on to Windows without using the
SD memory card.
Select [OK].
61