Connecting Peripherals - Panasonic CF-73 Series Reference Manual

Dealing with Problems (Advanced)

Connecting Peripherals

An error occurs while installing the
driver
Your peripheral does not work
The cursor does not move from mouse
operations
When you install the driver for a PC Card or peripheral device, be sure to use a
driver that is compatible with the operating system. If you use an incompatible
driver, malfunction may occur. For information on drivers, contact the
manufacturer of the peripheral device you purchased.
Before connecting a peripheral, change the multimedia pocket device in
accordance with the media in which the driver of the peripheral exists. Once a
screen to install a driver is displayed, the multimedia pocket device cannot be
recognized even if it is properly installed.
Make sure a driver is installed.
Contact the manufacturer of the product.
When operation resumes from the standby or hibernation mode, devices such
as a mouse, modem or PC Cards may not function properly. In such cases,
you will need to restart your computer or reinitialize the individual devices.
When is displayed in the Device Manager, try removing and inserting the
device once more. If the problem persists, restart the computer.
Depending on the device connected, the computer may not recognize when the
device is connected or disconnected, or the device may not operate properly.
Use the following procedure.
A Select [start] - [Control Panel] - [Performance and Maintenance] - [System]
- [Hardware] - [Device Manager].
B
Select the applied device, and remove the check mark for [Allow the
computer to turn off this device to save power] in [Power Management].
(This item may be unavailable for some types of devices.)
Check your mouse connection.
A driver which is compatible with the connected mouse must be installed.
If the device does not operate when the driver is installed:
In the Setup Utility, set [Touch Pad] to [Disable].
144