Related Manuals for Southern Enterprises Kinsley BT7860A0TX
Summary of Contents for Southern Enterprises Kinsley BT7860A0TX
- Page 1 BT7860A0TX/BT7860B0TX Kinsley Corner Vanity Sink Assembly Instructions For assistance with assembly, contact: Southern Enterprises, Inc. Customer Service: 1-800-633-5096 service@seidal.com www.seifurniturestore.com Page | 1...
- Page 2 Kinsley Corner Vanity Sink Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
- Page 3 Quantity Quantity Quantity of 16 of 16 of 16 Large Bolts. Dia:1/4”*1-3/8”L Spring Washer Flat Washer Quantity Quantity Quantity of 1 of 24 of 2 Allen Wrench Wood Dowel Knob Quantity Quantity Quantity of 4 of 2 of 12 Small Bolts Dia.5/32”*3/4”L Hinge Screw (Ø3.5*16mm)
- Page 4 Kinsley Corner Vanity Sink Assembly Instructions Insert Wood Dowels (5) into pre-drilled holes on Right Side Panel (B). Attach Front Upper Bar (D) and Front Bottom Bar (I) to Right Side Panel (B) with Large Bolts (1) and Washers (2/3). Tighten Large Bolts (1) with Allen Wrench (4).
- Page 5 Attach Fixed Shelf Panel (E) to assembled unit from Figure 2 with Large Bolts (1) and Washers (2/3). Tighten Large Bolts (1) with Allen Wrench (4). Figure 3 Insert Wood Dowels (5) into pre-drilled holes on Back Bars (G/H). Attach Back Bars (G/H) to Back Leg (F) with Large Bolts (1) and Washers (2/3).
- Page 6 Insert Wood Dowels (5) into pre-drilled holes on Back Bars (G/H). Attach Back Bars (G/H) to Back Leg (F) with Large Bolts (1) and Washers (2/3). Tighten Large Bolts (1) with Allen Wrench (4). Figure 5 Align assembled unit from Figure 5 to assembled unit from Figure 3 by inserting Wood Dowels (5) into...
- Page 7 Attach Fixed Shelf (E) to the aligned unit from Figure 6 with Large Bolts (1) and Washers (2/3). Tighten Large Bolts (1) with Allen Wrench (4). Figure 7 Attach Metal Legs (J) to Metal Upper Frame (K) with Medium Bolts (10). Tighten Medium Bolts (10) with Allen Wrench (4).
- Page 8 Align Metal Bottom Frame (L) to assembled unit from Figure Figure 9 Attach Bottom Metal Frame (L) to assembled unit from Figure 8 with Medium Bolts (10). Tighten Medium Bolts (10) with Allen Wrench (4). Figure 10 Page | 8...
- Page 9 Attach assembled unit from Figure 10 to assembled unit from Figure 7 with Medium Bolts (10) and Washers (11/12). Tighten Medium Bolts with Allen Wrench (4). Figure 11 Attach Hinges (8) to Door (M) with Screws (9). Tighten screw with Phillips screwdriver (not included).
- Page 10 Attach Door (M) to assembled unit from Figure 11 with Screws (9). Attach Handle (6) to assembled unit with Small Bolts (7). Tighten Screws (9) and Small Bolts (7) with Phillips screwdriver (not included). Figure 13 Insert Marble Top (A) into assembled unit from Figure 13.
- Page 11 Now your Kinsley Corner Vanity Sink is ready for use! Note: Install not included piping items: faucet, drain, and supply lines to vanity sink according to the instructions supplied with those items. Installation of faucet, drain, and supply lines by a certified plumber is recommended.
-
Page 12: Parts Replacement Form
90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas), Mon-Fri 9am – 4pm CST, or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts.
Need help?
Do you have a question about the Kinsley BT7860A0TX and is the answer not in the manual?
Questions and answers