Table of Contents
Advertisement
Walkera All Rights Reserved
2 Open
1 Press
Ready to fly
Power on and connect
Note: Before the aircraft is powered on, make sure the Camera shield is removed to affect the aircraft self-test.
1) Long press the power button to open the WK-V8 controller, and rest in the horizontal position until the GPS signal
is successfully received.
2) Short press the battery power switch once, then long press the power switch for 3~5 seconds to turn on the aircraft.
3) Put the aircraft in the horizontal position, wait until the aircraft status indicator turns from yellow light flashing fast
to green light flashing slow, and the buzzer turns to not beeping, which indicates the success of connection and pairing.
Connect mobile devices
Open the WLAN setting item of the mobile device, wait for about 30 seconds, when WK-GRD-XXXXXX appears
in the available WLAN list, click " WK-GRD-XXXXXX " and enter the password " 12345678 " to connect, exit the
setting after successful connection interface.
Download offline maps
then click "Download" to download the offline map of the area, click "
return to the main interface after the download is completed.
Activate and fly the aircraft and bind the device
The brand new T210 MINI must be activated and bound to the device by the WK Fly App, please turn on the power
of the aircraft and the remote control respectively, run the WK Fly App after connecting the mobile phone, and
operate according to the interface prompts. An internet connection is required during activation.
CONNECTION GUIDANCE
Note: Before flying, please download an offline map of the planned flight area (download the offline
map when your mobile device is connected to the Internet).
" in the upper left corner of the APP to
GO FLY
13
T210 MINI(WK-V8)Operation guide
WK-V8
controller
Aircraft
Connected
Sport
98.5%
00:01
Offline Map
33
00 00
Advertisement
Table of Contents
