Table of Contents
Advertisement
T210 MINI(WK-V8)Quick operation guide
Calibrate the WK-V8 controller joystick
The calibration of voice handle lever has been set, please follow the following methods;
Turn Off the aircraft power or lock the motor before operation.
The operation method is as follows
down until the cursor selects "
2) Rotate the joystick once in a circle with the maximum mechanical stroke, and then keep the joystick back to the
center;
3) After waiting for the voice prompt "Joystick calibration successful", press the joystick in the middle to exit the
middle to exit the voice controller setting menu and return to the standby main interface.
Pair the frequency
The whole set of aircraft has been paired frequency before leaving the factory, under normal circumstances,
there is no need to pair the frequency again, and it will be automatically connected after booting;
If you have replaced a new aircraft or a new WKRC-H9/WK-V8 remote control after sales, you need to pair the
frequency before connecting the new aircraft or new WKRC-H9/WK-V8 remote control, otherwise you will not
be able to connect.
The operation is as follows
the aircraft buzzer will sound;
aircraft" in the pop-up window, the aircraft and the remote controller will automatically pair the frequency
until the buzzer prompt tone ends, indicating that the pairing frequency has been successful.
Calibrate
Click the "Search" button on the right side of "Connecting new
24
Walkera All Rights Reserved
Advertisement
Table of Contents
