Table of Contents
Advertisement
T210 MINI(WK-V8)Quick operation guide
Introduction of the WK Fly APP interface
In this interface, you can preview the real-time HD video and photos taken by the T210 MINI, as well as dynamically
set the parameters such as the aircraft, voice controller, camera gimbal and battery.
1
25
24
23
22
21
20
19
1) Return: Return to the previous level.
2) Device Status: Display real-time status information
of the device.
3) Time of flight: the time of the aircraft flight.
4) Flight mode: Click the icon to expand the list of flight
modes. In the list, AltHold, Auto, Follow,Loiter, RTL,
Land, Sport and other flight modes. Select the flight
mode by selecting the intended flight mode in the list.
5) Aircraft battery information: Click the icon to expand
and view the current power and voltage information
of the aircraft battery.
6) GPS status: Click the icon to expand to view the
number of GPS stars and GPS positioning mode
received by the current aircraft.
7) HD signal intensity: shows the intensity of the
transmission signal between the aircraft and the
WK-V8 controller.
8) Notification information: Click the icon to view the
list of notification information.
9) Settings: Click the icon to expand the Settings menu:
there are aircraft settings, battery information and
settings, system settings.
"
"aircraft setting: RTL Height setting,Flight safety
settings(Fly Speed,Steering sensitivity,Limit Height,
2
Drone disconnected
Camera windowed interface
18
3
4
5
N/A
N/A
00:00
17
Fence Enable,Limit Distance, Gimbal Roll,Follow Me
Alt,Take Point,Lost Action)Sensor setting,New Model
switch.
"
"battery setting: it has battery remaining power,
current voltage, current temperature, series number,
charge and discharge shield ring times; low power
automatic return switch.
"
"system setting: equipped with map settings;
Stick Mode,Trajectory switch ,Live setting; firmware
upgrade; Viedo Delayon setting and hardware Decodec.
10) Preview resolution: The image preview quality of
the camera window (i.e., image transmission quality).
11) Aircraft TF card capacity: Display the current aircraft
TF card capacity information in real time.
12) Exposure: Displays the current exposure value of
the aircraft camera.
13) Camera working mode switch: with each click of
the icon, the camera working mode will switch
between the photo and the video.
14) Camera shutter icon: In photo mode, click this icon
to take a photo at a time; in video mode, click the
shutter icon to start recording, click the shutter icon
again to stop and save the video.
10
Walkera All Rights Reserved
6
7
8
9
N/A
00： 00
13
14
15
16
10
11
12
Advertisement
Table of Contents
