Introduction; Conventions; Feature Descriptions By Model - HP ProCurve Switch 2900yl-24G Access Security Manual

Table of Contents

Advertisement

Getting Started

Introduction

C a u t i o n
1-2

Introduction

This Management and Configuration Guide is intended for use with the
following switches:
ProCurve Switch 2900yl-24G
ProCurve Switch 2900yl-48G
This guide describes how to use the command line interface (CLI), Menu
interface, and web browser to configure, manage, monitor, and troubleshoot
switch operation.
For an overview of other product documentation for the above switches, refer
to "Product Documentation" on page xv.
You can download documentation from the ProCurve Networking web site,
www.procurve.com.
Use only the supported genuine ProCurve mini-GBICs with your switch.
Non-ProCurve mini-GBICs are not supported.

Conventions

This guide uses the following conventions for command syntax and displayed
information.

Feature Descriptions by Model

In cases where a software feature is not available in all of the switch models
covered by this guide, the section heading specifically indicates which product
or product series offer the feature.
For example, (the switch is highlighted here in bold italics):
"QoS Pass-Through Mode on the Switch 2900".

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve switch 2900yl-48gJ9049aJ9050a

Table of Contents