Maintenance - Phoenix Mecano DEWERT OKIN IPROXX 2 System Instructions

Maintenance

6. Maintenance
Type of check
Check the function and safe-
ty of the electrical system.
Look over the housing peri-
odically for any signs of
damage.
Look over the plug-in con-
nections and electrical ac-
cess points for signs of
damage.
Look over the cables for any
signs of damage.
Periodic functional test of the
handset
Cleaning and care
The IPROXX 2 was designed so that it would be easy to clean. Its smooth surfaces simplify the
cleaning process.
NOTICE
Never clean the handset in an automated washing system or with a high-pressure
cleaner. Do not allow fluids to penetrate the handset. Damage to the handset could
result.
Do not use a cleanser that contains benzene, alcohol or similar solvents.
1 Be sure to disconnect the handset cable from the drive or controller before you start cleaning.
2 Clean the IPROXX 2 handset using a moist cloth.
3 Be sure that you do not damage the connecting cables during the cleaning.
34
Explanation
A qualified electrician should car-
ry out this inspection.
Check the housing for breaks or
cracks. The IP-class protection
will be impaired by any breakage
or cracks.
Check that all electrical cables
and connections are firmly seated
and correctly positioned.
Check the connecting cables for
pinching or shearing. Also check
the strain relief and kink protec-
tions mechanisms, in particular
after any mechanical load.
Move the drive to the end posi-
tions in order to test the end
switches.
Time interval
Periodic inspections can
be carried out at intervals
based on the risk as-
sessment which you con-
duct for your end product.
At least every six months.
At least every six months.
At least every six months.
At least every six months.
74829 6.0
IPROXX 2