Table of Contents
Advertisement
Operation
4.10 Android smartphone / tablet
4.10.1 Installing the app on your smartphone / tablet
Open the play store
Download the "Dewert remote for beds" app from the play store
4.10.2 Discovering new devices on your Android smartphone / tablet
The IPROXX 2/SMP/Bluetooth
the smartphone / tablet app for operations.
Requirements:
The Bluetooth
After a request was made by the smartphone / tablet, access to the location has been permitted.
The handset is connected to a control unit.
The GPS function is activated (depending on smartphone / tablet).
The control unit is connected to the power supply.
Before the discovery process, you should have configured all settings
scribed in section 4.7.4. Key 9 (Bluetooth
a) Initial commissioning (before smartphone / tablet discovery)
1 Insert the key into the turnkey lock (on the IPROXX 2/SMP/Bluetooth
2 Turn the key until the arrow on the turnkey lock is set to "Changing mode" (
the Bluetooth
3 Turn the turnkey back until the arrow is pointing towards the
should now be flashing blue.
4 Activate Bluetooth
5 Start the "Dewert smart remote for beds" app.
shown.
6 Select the Bluetooth® device (IPROXX ...).
7 Pair with the smartphone / tablet.
8 You can use the app when the turnkey lock is set to either unlocked (
(
). Function enabled for patients are then shown in the app.
9 The status LEDs are illuminated in green next to key pairs that are enabled. They are not lit for
key pairs that are disabled.
28
model can be discovered on your smartphone so that you can use
®
function in the smartphone / tablet is activated.
®
function as described in section 4.7.4.
®
on your smartphone / tablet.
®
) must be activated (enabled).
®
Select one of the available Bluetooth® devices
for the patient, as de-
).
®
). Then activate
(unlocked). The Bluetooth
) or to patient mode
74829 6.0
IPROXX 2
LED
®
Advertisement
Table of Contents
