Table of Contents
Advertisement
IPROXX 2
4.
Operation
When this document refers to the model IPROXX 2/SMP, this also includes the model
IPROXX 2/SMP/Bluetooth
4.1
General information
Ensuring single-fault protection (for the IPROXX 2/SM, SM + and SMP models)
For ensuring single-fault safety, drive motions can be disabled using the integrated lock function.
This function makes use of an electro-mechanical switch to break the motor circuit.
Single-fault protection can only be ensured when the turnkey lock has been set to
(completely locked setting).
The "Enabling and Disabling the Key Functionality" section describes how to operate this lock-
ing mechanism.
4.2
Information on battery power
If you are operating your system on battery power then observe the following notice.
NOTICE
After it has been used to move your application (in the turnkey lock positions
lock position
tery is connected!
4.3
Connecting the handset to the drive system
During initial commissioning, connect the handset to the corresponding handset port on the Dew-
ertOkin drive system.
A sticker on the drive system will indicate where the handset port is located.
NOTICE
Only connect the components according to the specifications found on the sticker.
Any other arrangement of connections may damage the drive system.
74829 6.0
.
®
CAUTION
), the IPROXX handset should be turned back to its locked position (turnkey
). This prevents the system from gradually discharging when the bat-
Operation
or
13
Advertisement
Table of Contents
