Display Functions - Phoenix Mecano DEWERT OKIN IPROXX 2 System Instructions

Operation
4.7.4 Enabling the programming function for nursing staff (for the IPROXX 2/SMP(Bluetooth
When using the handset model IPROXX 2/SMP(Bluetooth
grammed by the nursing staff.
1 Insert the socket key in the turnkey lock.
2 Turn the key until the arrow on the turnkey lock is pointing towards
tion on page 19). When set to this position, the handset cannot be used to carry out adjustment
movements.
3 The key pair and function keys on the handset can be programmed by the nursing staff. Briefly
press the particular key that you wish to enable. The function of the corresponding key pair is then
enabled. The status LED for each key pair shows the status of those keys:
- Status LED is on: That key pair is enabled for the patient.
- Status LED is off: That key pair is disabled for the patient.
- Status-LED Bluetooth
- Status-LED Bluetooth
4 The Bluetooth
5 Turn the turnkey back until the arrow is pointing towards the
ing to the unlocked keys are now possible.
4.8

Display functions

The IPROXX 2 handset features a function/CARE LED and a battery/power-on LED. The handsets
with the lock function also feature a lock-status LED. They have the following functions:
Function/CARE LED
illuminates when function or travel keys are pressed,

illuminates continuously when there is a fault or error,

does not illuminate for key press when there is a fault or error.

Battery/power-on LED
can only illuminates if there is a battery connector on the control unit

flashes when the battery is charging from mains power,

illuminates continuously when powered from mains power cable without the battery,

illuminates continuously when powered from mains power cable with a charged battery,

is not illuminated when operating from battery power.

Status LED
illuminates when you press an unlocked key pair,

 does not illuminate when you press a locked key pair,
Status LED for Bluetooth
illuminates green when Bluetooth

 flashes blue when the discovery mode for Bluetooth
illuminates blue when a Bluetooth

 The table of errors in the "Troubleshooting" Chapter describes how errors are displayed by the
LED display.
22
is on: Bluetooth
®
is off: Bluetooth
®
function must be enabled, before the smartphone / tablet can be used.
®
®
is enabled,
®
connection has been established.
®
), the key lock function can be pro-
®
is enabled for the patient,
®
is disabled for the patient.
®
is enabled,
®
IPROXX 2
®
(as shown in the illustra-
. The movements correspond-
74829 6.0
))