Led Status Indication - Wieland wienet LTE LR140 EMEA User Manual

Industrial mobile lte router
Table of Contents

Advertisement

6.6

LED Status Indication

There are LED indicators on the front panel of the router to provide router status information.
Moreover, ETH connector, has two additional LEDs providing information about the port status.
Table 10: LED Status Indication
Caption Farbe
PWR
USR
TUE
THU
DAT
SIG
TECH
SIM
ETH0
ETH0
Wieland Electric GmbH | BA001293 | 02/2023 (Rev. A)
State
Green
On
Green
Blinking
Green
Fast blinking
Green
Green
On
Green
On
Green
Blinking
Green
On
Blinking
Fast blinking
Green
On
Blinking
Fast blinking
Green
On
Fast blinking
Green
On
Orange
On
Orange
Blinking
Orange
Off
Description
Starting of the router.
Router is ready.
Updating firmware.
Function of this LED diode can be selected by user.
The first binary input is active.
The second binary input is active.
Communication in progress on radio channel.
Good signal.
Fair signal.
Poor signal.
4G technology is used by the active SIM.
3G technology is used by the active SIM.
2G technology is used by the active SIM.
SIM1 is selected.
SIM card problem (missing SIM or PIN not entered).
Always on
The network cable is connected.
Data transmission.
The network cable is not connected.
Hardware Functionality
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

83.041.0140.1

Table of Contents