Table of Contents
Advertisement
6.7
Reset Functions
The RST button on the front panel can be used in three different situations:
• Reboot the router: Hold the RST button for less than 4 seconds, the router will be restarted.
• Factory reset – restore the default configuration: Hold the RST button for more than 4 seconds.
The PWR LED turns off and on again. We recommend holding down the RST button for 1 second
after turning on the PWR LED on the front panel.
• Emergency factory reset – If the router is unable to boot up due to the bad configuration, turn
off the router (disconnect the power supply). Push and hold the RST button, turn on the router
and hold the RST button for at least 10 seconds. This will return the configuration of the router
to default one.
It is recommended to back up the settings of the router configuration, prior to performing the
factory reset of the router. Note that resetting of the router reset the whole configuration to the
default state.
CAUTION
It is necessary to use a narrow screwdriver or any other small tool to press the RST button.
NOTICE
Figure 18: Resetting the Router
Table 11: Overview of reset functions
Action Router behavior Trigger events – options
Reboot Turns off and
Factory
Reset
Wieland Electric GmbH | BA001293 | 02/2023 (Rev. A)
• Disconnect and reconnect the power.
then turns on the
• Send text reboot via SMS to SIM card number put in your router
router
(your phone number has to be authorized – see the configuration
manual).
• Press the Reboot menu item in the web interface.
• Press the RST button and hold less than 4 seconds.
Restores the
• Hold the RST button for more than 4 seconds.
default
• If it does not help (router does not start at all), turn off the router
configuration
(power supply). Push and hold the RST button, then turn on the
and reboots the
router and hold the RST button for more than 10 seconds.
router
Hardware Functionality
23
Advertisement
Table of Contents
