First Use; Powering Up The Router; Router Configuration - Wieland wienet LTE LR140 EMEA User Manual

7

FIRST USE

7.1

Powering up the Router

The router will start up when a power supply is connected to it. By default, the router will
automatically log on to the default APN of the inserted SIM card. The DHCP server will assign an
address to the devices connected through the Ethernet port ETH0.
7.2

Router Configuration

Initial router configuration can be made via a web browser running on your PC. Here you can
perform router monitoring, configuration, and administration. First, connect the PC to the default
LAN interface. To get the router interface, enter the
Please note that usage of the HTTPS protocol for secure communication over the network is
required.
By default, there is just the root user account created on the router. See the product label on the
router for its default password. Log in to the web interface by the root user and his password. If
logged in successfully, the user will have access to the router web interface, see Figure 19. See the
configuration manual of the router for a detailed description and examples of the router
configuration.
After logging on to the device for the first time, we strongly recommend changing the default
password due to security reasons.
CAUTION
For security reasons, we highly recommend updating the router's firmware to the latest version
regularly. Downgrading the firmware to an older version than the production version or uploading
firmware intended for a different device may cause the malfunction of the device.
CAUTION
Wieland Electric GmbH | BA001293 | 02/2023 (Rev. A)
https://192.168.1.1 address in a web browser.
First use
24