Table of Contents
Advertisement
6.7
LED Status Indication
There are LED indicators on the front panel of the router to provide router status information.
Moreover, ETH connector, has two additional LEDs providing information about the port status.
Table 12: LED Status Indication
Caption Color
PWR
USR
DI
DO
DAT
SIG
TECH
SIM
ETH0
ETH1
ETH0
ETH1
Wieland Electric GmbH | BA001291 | 07/2022 (Rev. A)
State
Green
On
Green
Blinking
Green
Fast blinking
Green
Green
On
Green
On
Green
Blinking
Green
On
Blinking
Fast blinking
Green
On
Blinking
Fast blinking
Green
On
Blinking
Fast blinking
Green
On
Green
Off
Orange
On
Orange
Blinking
Orange
Off
Description
Starting of the router.
Router is ready.
Updating firmware.
Function of this LED diode can be selected by user.
The first binary input is active.
The second binary input is active.
Communication in progress on radio channel.
Good signal.
Fair signal.
Poor signal.
4G technology is used by the active SIM.
3G technology is used by the active SIM.
2G technology is used by the active SIM.
SIM1 is selected.
SIM2 is selected.
SIM card problem (missing SIM or PIN not entered).
Selected 100 Mbps bit rate.
Selected 10 Mbps bit rate.
The network cable is connected.
Data transmission.
The network cable is not connected.
Hardware Functionality
23
Advertisement
Table of Contents
