Table of Contents
Advertisement
The hot plate can reach temperature up to 200° C,
Care must be taken not to touch it or serious burns may occur.
The equipment will maintain a high temperature for a considerable time
after switching off and it is essential to wait before starting cleaning
operations.
Sealed sample plates may remain hot for some seconds after sealing and
should be handled with care.
This equipment should only be dismantled by properly trained personnel,
removing the top case exposes potentially lethal mains voltages.
1.4 Applicable Rules
2006/95/CE
2004/108/CE
2002/96/CE
4titude Ltd, The North Barn, Surrey Hills Business Park, Damphurst Lane, Wotton, Dorking, Surrey, RH5 6QT, UK
Tel: +44 (0) 1306 884885 Fax: +44 (0) 1306 884886 info@4ti.co.uk www.4ti.co.uk
WARNING: Hot surface
WARNING: Risk of electrical shock (high voltage)
Low Voltage Directive
Electromagnetic Compatibility Directive
amended 2003/108/CE WEEE Directive
Page | 8
Advertisement
Table of Contents
