Table of Contents
Advertisement
7
MAINTENANCE
7.1 Regular Maintenance
The unit does not require regular maintenance but it should be kept
clean.
The heat sealer can be cleaned with a cloth dipped in water or ethanol
(methanol, formaldehyde can also be used).
The unit should not be immersed in solvents.
Do not use acetone or abrasive cleaners.
No parts are to be autoclaved.
In case of radioactive spillages it is recommended to use an appropriate
cleaning agent.
For any other maintenance operation not indicated in this manual, please
contact 4titude.
Any cleaning procedure must be followed with the unit switched
off, the power cable disconnected and the heated parts at
4titude Ltd, The North Barn, Surrey Hills Business Park, Damphurst Lane, Wotton, Dorking, Surrey, RH5 6QT, UK
Tel: +44 (0) 1306 884885 Fax: +44 (0) 1306 884886 info@4ti.co.uk www.4ti.co.uk
ambient temperature
Page | 29
Advertisement
Table of Contents
