4titude 4s2 Manual page 23

Place the sealing film over the plate, ensuring that the sealing surface is
face down (Figure 20). When using heat sealing films that have a
tendency to curl (for example 4titude Peel Seal (product code 4ti-0521),
DMSO Resistant Seal (4ti-0587) and Clear Weld Seal Mark II (4ti-0575))
use the sealing frame which is supplied with the 4ti-0625 adapter. For
deep well plates place the weighted platen on top of the sealing film
(Figure 21). For most other plates we recommend the use of the sealing
frame (Figure 22).
Figure 21 - Position
sealing film / foil on
plate
Push the drawer in fully and hold until you can hear an audible warning
that indicates the door has been locked. The microplate with the sealing
film will now be lifted up and brought into contact with the heating platen.
4titude Ltd, The North Barn, Surrey Hills Business Park, Damphurst Lane, Wotton, Dorking, Surrey, RH5 6QT, UK
Tel: +44 (0) 1306 884885 Fax: +44 (0) 1306 884886 info@4ti.co.uk www.4ti.co.uk
Figure 22 - Position
weighted platen over
sealing film / foil
Figure 24 - Close the drawer to start sealing
Figure 23 - Position
sealing frame over
sealing film / foil
Page | 22