6.1 Cleaning the Heating Platen
If the operator places the sealing film upside down on the microplate or
PCR plate, the sealing film may get stuck on the heated sealing plate. To
clean it, proceed as follows:
Switch "OFF" the unit
•
Disconnect the unit from the mains power supply
•
Release the lever on the back of the unit counterclockwise (see
•
Figure 24)
The drawer can now be fully removed from the unit
•
4titude Ltd, The North Barn, Surrey Hills Business Park, Damphurst Lane, Wotton, Dorking, Surrey, RH5 6QT, UK
Tel: +44 (0) 1306 884885 Fax: +44 (0) 1306 884886 info@4ti.co.uk www.4ti.co.uk
Do not attempt to clean the unit until it has cooled
down to near room temperature
Figure 25 - Lever in "locked" position
Page | 27