Introduction; Chapter Index - 4titude 4s2 Manual

1.1 Introduction

The variable temperature thermal Sealer 4s2 is a semi-automatic
instrument designed to seal sample plates made from various polymers.
The sealer can be used with most plate types and sealing films available.
Both temperature and time are variable and can be optimised to suit each
sealing plate and film.
When the 4s2 is ready to start the operator needs to position the sample
plate together with a foil or film on the plate carrier. The sealing operation
starts once the drawer with the plate carrier has been closed. Film and
sample plate will then automatically be brought in contact with the heating
platen.
As soon as the sample plate is in contact with the heating platen a
countdown timer starts and after the chosen sealing time the motor
automatically moves the sample plate away from the heating platen and
the operator can remove the sealed sample plate for further processing.

1.2 Chapter Index

To use the 4s2 correctly and to obtain the best results, please read this
manual carefully.
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
4titude Ltd, The North Barn, Surrey Hills Business Park, Damphurst Lane, Wotton, Dorking, Surrey, RH5 6QT, UK
Tel: +44 (0) 1306 884885 Fax: +44 (0) 1306 884886 info@4ti.co.uk www.4ti.co.uk
Introduction, Warnings and Technical Specifications
General Description
Installation
Set-Up
Basic functions
Troubleshooting
Maintenance
Accessories & Consumables
Page | 6