Quick Panel Operator User Manual
GFK-2847AA
IC755CxW07CDx
Adhere to the following guidelines:
A terminal block is supplied with the unit.
•
The mating terminal block supports stranded 30 to 14 AWG (0.05 to
•
2.00 mm2) wires.
At a minimum, the cable must be rated for 75°C (167°F), or more.
•
Secure the serial cable to the mating connector while noting signal
•
orientation and tighten the screw clamps.
The torque for the attaching screws is 0.3 Nm (2.66 in-lb.).
•
Serial Port COM1 Details
Interface: x1 RS-232
Connector: Euro Terminal (Tyco Electronics 284539-5)
Mating Connector: (Tyco Electronics 284510-5)
Pin
Signal
Pin-Out
#
Name
1
TXD
Figure 74: Serial Port COM1 Pin-Out IC755CxW07CDx
2
RXD
3
RTS
4
CTS
5
SGND
Mounting and Installation
Section 5
Jan 2023
71