2Enable Or Disable Snmp Agent; 3Export Mib To Sd Card - Emerson QuickPanel+ IC755CxS06RDx User Manual

Quick Panel Operator User Manual
GFK-2847AA
3.14.2 Enable or Disable SNMP Agent
SNMP communication is disabled by default on the QuickPanel
for security purposes. To enable or disable SNMP communication using
the QuickPanel
3.9.4, Enable or Disable SNMP Agent.
Note: Enabling or disabling SNMP communication is a one-time user configuration.
3.14.3 Export MIB to SD Card
With the SNMP Agent enabled on the QuickPanel
QuickPanel
to an SD Card.
NOTICE
It is highly recommended that you pre-load Emerson MIBs (GEIP-SMI.txt and GEIP-
PRODUCTS-MIB.txt in sequence) before loading the QuickPanelMIB.mib file into SNMP
Managers to avoid any MIB compiler errors.
Download the MIBs GEIP-SMI.txt and GEIP-PRODUCTS-MIB.txt from the Support Site.
QuickPanelMIB.mib may be copied from the QuickPanel+ device by performing the
following procedure.
To export the MIB to an SD Card
1. Insert a working SD Card into the external card slot on the
2. From the Start menu, select System, open the QuickPanel
3. Copy the MIB file to the SD Card.
Figure 41: Copy MIB to SD Card
Software
OS Utilities Settings tool refer to the procedure in Section
+
Management Information Base (MIB) QuickPanelMIB.mib file
+
QuickPanel device.
+
Setup Tool, and select the SNMP Agent tab.
device
+
device, export the
+
+
Section 3
Jan 2023
42