Memory Allocation Modification - Emerson QuickPanel+ IC755CxS06RDx User Manual

Quick Panel Operator User Manual
GFK-2847AA
6.5.2

Memory Allocation Modification

To change the memory allocation
1. From the Control Panel, double-tap System to display the System
2. From the Memory tab, drag the slider bar to divide into Storage
Figure 85: System Memory Slide Bar Display
Note: Storage memory is limited to a maximum of 128 MB. Using the slide bar to increase storage
memory will provide more RAM-based storage in the folder \Object Store.
3. Tap OK to apply the new setting.
4. Run the Backup Utility to save the settings.
Operation
Properties window.
and Program memory. The amount of memory allocated to and
used by each area is displayed in the window. The blue slider bar
indicates the current amount of unallocated SDRAM and
determines the boundaries within which the slider can move.
Section 6
Jan 2023
85