AGFA Classic E.O.S. Reference Manual page 98

3
Tilt the dryer block to its horizontal position.
Take care not to touch any inner parts of the infrared dryer since they can
be extremely hot. The quartz lamps can be damaged when touched.
4
Remove the roller sets alternately, by pressing their release clips [1] and sliding
them out of their location [2].
Remove, clean and replace the roller sets one by one, so that they remain at their
original locations.
Make sure not to bend the film guide elements. Handle with care!
98
2
INSTRUCTIONS FOR SKILLED SERVICE PERSONNEL ONLY
1
1280C GB 20001204