AGFA Classic E.O.S. Reference Manual page 106

5
Loosen the screw cap and remove the filter from its housing.
Loosen the screw cap by hand only. Do not use any tools to remove the
screw cap to prevent damage.
6
Clean the water filter under running water.
Be careful, do not damage the wire gauze.
7
Place the filter back into its housing.
8
Fasten the screw cap onto the filter housing.
9
Reinstall the side panel.
10
Fasten the crosshead screw and reinstall the top cover.
106
INSTRUCTIONS FOR SKILLED SERVICE PERSONNEL ONLY
1280C GB 20001204