AGFA Classic E.O.S. Reference Manual page 57

3
Remove the tank covers from the roller sets.
4
Clean the tank covers and film guide elements using a moist soft sponge.
Be extremely careful: do not damage the plastic film guide elements!
Take care: the film guide elements have sharp edges.
5
Wipe the tank covers dry.
6
Check the numbers which mark the tank covers and their corresponding tanks.
Make sure to place the tank covers back on their corresponding roller sets.
Refer to 'Overview and location of identification labels.' on page 53.
You are reminded to handle all chemicals with care, to wear protective gloves and an
apron to protect your clothing, and to wear protective glasses for your safety. Always
conform to local regulations regarding the disposal of chemicals.
1280C GB 20001204
57