AGFA Classic E.O.S. Reference Manual page 71

7
Replace the pump housing in the processor.
Make sure to check the numbers which mark the pump housings and their corre-
sponding locations.
Make sure to place every element back in the appropriate location.
'Overview and location of identification labels.' on page 53.
If you can not slide the housing all the way in, you may be trying it the wrong way.
8
Reinstall the top cover.
You are reminded to handle all chemicals with care, to wear protective gloves and an
apron to protect your clothing, and to wear protective glasses for your safety. Always
conform to local regulations regarding the disposal of chemicals.
1280C GB 20001204
Refer to
71