AGFA Classic E.O.S. Reference Manual page 18

Switching the Classic E.O.S. on
1
Locate the main switch and place it in position 'I'.
Do not touch the switches with wet fingers!
The processor starts an initialization procedure that may take 15 to 20 minutes.
During the initialization phase an emergency film can be processed if a film
is introduced on the feed table.
page 25.
2
The developer and fixer are heated or cooled.
cHDWLQJ
GHYHORSHU
You can watch the progress of heating or cooling as the temperature indication
changes accordingly.
3
After a while, the following message indicates that the processor is ready for
operation:
5($'<
53
The actual temperature to be reached depends upon the setting for the actual pro-
cessing cycle.
18
d&
Refer to 'Developer temperature' on page 36.
Refer to 'Processing an emergency film' on
or, e.g.:
53 d&
1280C GB 20001204