AGFA Classic E.O.S. Reference Manual page 82

6
Check that the tanks still contain a sufficient amount of developer or fixer.
The developer or fixer level should be up to the marking in the tank.
7
If the level of developer or fixer is too low, fill the developer or fixer tank with
ready-mixed developer or fixer, respectively.
Take care not to spill any fixer into the developer tank. Otherwise, clean the
developer tank again and rinse it thoroughly.
8
Make sure to check the numbers which mark the roller sets, the tank covers and
their corresponding tanks.
Make sure to place every element back in the appropriate location.
'Overview and location of identification labels.' on page 53.
9
Place the roller sets back in the corresponding tanks (refer to the identification
number labels).
You are reminded to handle all chemicals with care, to wear protective gloves and an
apron to protect your clothing, and to wear protective glasses for your safety. Always
conform to local regulations regarding the disposal of chemicals.
82
Developer Fixer 1 & 2 Water
Refer to
1280C GB 20001204