AGFA Classic E.O.S. Reference Manual page 32

General guidelines
Always keep in mind the following general guidelines when changing the pro-
cessing parameter settings.
The procedures in this chapter describe how to set the processing parameters
one by one. It is possible however to make all required adjustments in succes-
sion, without having to return each time to the READY status display:
During the customization session, if you do not press any key on the control
panel within 45 seconds, the READY status display reappears and any changes
you made in the settings are discarded.
Two different screens can be discerned:
Menu screens (shadowed rectangles in the menu structure diagram)
0HQX LWHP 
0HQX LWHP 
In the menu screens, use the Up and Down keys to toggle between both items on the
menu, and to scroll to a following (Down key on last line) or a previous menu (Up key
on first line) on the same level. The currently active menu item is blinking . If you
press the Confirm key on a blinking item, you select that menu item.
Data screens
0HQX LWHP
9DOXH
In the data screens, use the Up and Down keys to increase or to decrease the
value of the setting. If you press the Confirm key on a value, you select that
value for the concerned menu item.
32
Æ
Ç
ÇÆ
Toggle &
scroll
Increase &
decrease
Select
Select
1280C GB 20001204