Troubleshooting Checklist - AGFA Classic E.O.S. Reference Manual

Troubleshooting checklist

Error status
You try to feed a film but it is not
accepted.
Display messages 'Developer level
low' or 'Fixer level low'.
Display messages 'Water level low'.
An accepted film is not deposited in
the exit tray.
The processed film is still moist, or is
deformed or shows drying patterns.
Display messages 'Check water
pump'.
'Error 502 - See manual' message.
'Error 504 - See manual' message.
'Error 514 - See manual' message.
'Error 510 - See manual' message.
'Error 501', 'Error 503', 'Error 510',
'Error 506' and other 'Error XXX'
messages.
Messages when accessories are connected.
An interval beep accompanies the messages.
74
Refer to
The processor is out of opera-
tion.
The developer or fixer level is
too low.
The water level is too low.
Jammed film.
Film quality problems.
Clean the water pump.
If that does not help, contact
your local service organization .
The developer temperature is
too low.
The fixer temperature is too low.
Clean the pumps. (DEV, FIX1,
FIX2)
If that does not help, contact
your local service organization.
Failure of the dryer heaters.
Procedure for skilled service
personnel only.
Contact your local service organization.
Page
77
79
84
85
87
68
88
90
68
101
92
1280C GB 20001204