AGFA Classic E.O.S. Reference Manual page 64

12
Fill the tanks up to the marking with ready-mixed fixer or developer.
Take care not to spill any fixer into the developer tank. Otherwise, clean the
developer tank again and rinse it thoroughly.
13
Make sure to check the numbers which mark the roller sets, the tank covers and
their corresponding tanks.
Make sure to place all elements back to their appropriate location.
'Overview and location of identification labels.' on page 53.
14
Place the roller sets back in the corresponding tanks (refer to the identification
number labels).
You are reminded to handle all chemicals with care, to wear protective gloves and an
apron to protect your clothing, and to wear protective glasses for your safety. Always
conform to local regulations regarding the disposal of chemicals.
64
Developer Fixer 1 & 2 Water
Refer to
1280C GB 20001204