Korg CONCERT C-550 Owner's Manual page 39

Pedal does not work correctly
· Was a pedal pressed when thepower was turned
on or when settings were initialized?(p.6, 38)
· Has the pedal connector been disconnected?
(p.30)
Sostenuto pedal effect does not work
· Is manual punch-in selected as the recording
mode?(p.22)
· Has the pedal connector been disconnected?
(p.30)
Cannot playback
· Make sure that the C-550 is set to "In" (internal).
If you wish to use it as the slave device (the
device which will synchronize to the master
device), set it to "E" (external),and set the
external device to transmit MIDI Clock
data.(p.27)
Cannot record
· Is there sufficient free space in the recorder?(p.23)
· Is the recording mode setting appropriate?(p.21)
· Make sure that the C-550 is set to "In" (internal).
If you wish to use it as the slave device (the device
which will synchronize to the master device), set it
to "E" (external), and set the external device to
transmit MIDI Clock data.(p.27)
Does not respond to transmitted MIDI
data
· Make sure that all MIDI cables are connected
correctly.(p.24)
· Make sure that the C-550 is receiving data on
the same channel as the transmitting device is
using.(p.25)
· Do the MIDI channels (Part, Global) match?
(p.25, 26)
Specified drum sound is not heard
when key board is played
· Make sure that the [KEY TRANSPOSE] slider is
set to "C."(p.12)
Data
39