Korg Midi Driver Installation And Setup - Korg CONCERT C-550 Owner's Manual

2.Korg MIDI Driver
installation and setup
The "K org MIDI Dri ver" softw are is included
with the optional AG-001B and AG-002B.
If the application (sequencer) you are using on
your IBM PC (compatible) is compatible with
Windows, using the K org MIDI Dri ver will
allow the C-550 connected to the serial port to
be handled as a MIDI device. If the application
(sequencer) you are using on your Apple
Macintosh is compatible with the Apple MIDI
Manager , using the K org MIDI dri ver will
allow the C-550 connected to the serial port to
exchange data with the Macintosh.
Installing the Korg MIDI Driver into
Windows 3.1
If the processing speed of your computer is not
fast enough, data from MIDI IN may not be
received correctly.
1.In the control panel, double-click the Drivers
icon.
2.Click the [Add] button.
3.From the list of drivers, select [Unlisted or
Updated Driver] and click the [OK] button.
4.Insert the disk included with the AG-001B
into the floppy disk drive of your computer.
If you insert it into drive A, type in "A:\" (or
"B:\" if using drive B), and click the [OK]
button.
(The directory "A:\PC98", on the disk included with
AG-001B, is for a type of computer sold only in
Japan, and cannot be used with your computer.)
5.Select Korg PC/IF Driver, and click [OK]. The
setup window will appear. Now perform the
setup as explained in the following section
"Setting up the Korg MIDI Driver (Windows)".
6.After setup, remove the disk and select
[Restart Now] to make the driver take effect.
Data
31