Korg CONCERT C-550 Owner's Manual page 32

Data
Setting up the Korg MIDI Driver
(Windows)
1.Double-click the driver icon located in the
control panel, select [Korg PC/IF Driver],
and click the set button to access the setup
window.
2.Set the Serial Port setting to the serial port
that is connected to the C-550
[COM1]~[COM4].
If you wish to use the serial port for another purpose
after installing the Korg MIDI Driver, either delete
the driver or select [None] to defeat the driver.
3.When the C-550 is connected, [Independent
Synth/MIDI Out] is not used, so do not
check this item.
If you check it, operation will be incorrect.
4.[MIDI Out Messages] allows you to select
the messages that will be transmitted to the
C-550.
5.When you have finished making your
selections, click the [OK] button. If you
wish to cancel, click [Cancel].
32
Installing the Korg MIDI Driver into
Windows 95
If the processing speed of your computer is not
fast enough, data from MIDI IN may not be
received correctly.
1.In the task bar, click the [Start] button. Click
the [Control Panel] item located in [Settings].
2.In the control panel, double-click the
[Hardware] icon, and the hardware wizard
will start up. Click the [Next >] button.
3.In reply to the question "Automatically
detect new hardware?" be sure to select
[No], and click the [Next >] button.
4.Select [Sound, video, and game controllers]
and click the [Next >] button.