Playing Back Your Performance - Korg CONCERT C-550 Owner's Manual

Record and playback your performance
9.Press the [START/STOP] switch to stop
recording.
The indicator above the [START/STOP] switch and
the [RECORD] switch indicator will go off, and you
will automatically return to the measure where you
started recording. If the metronome is playing, press
the [METRONOME] switch to stop the metronome.
On the C-550,the recorded data is remembered
even when the power is turned off.
16
9
2.Playing back your
performance
1.Press the [SONG] switch.
The indicator at the [SONG] switch will light, and the
current song number (01 ~ 10) will appear in the
LED display.
2.Press the [+/UP] or [–/DOWN] switch to
select the song you wish to hear.
3.Press the [RESET] switch.
When you press the [RESET] switch, you will return
to the first measure.
4.Press the [START/STOP] switch, and play-
back will begin.
During playback, the indicator above the
[START/STOP] switch will blink in time with the
tempo.
5.To stop playback, press the [START/STOP]
switch.
The indicator above the [START/STOP] switch will
go off. Likewise, if the entire performance finishes
playing back, playback will stop and the indicator
above the [START/STOP] switch will go off.
Adjusting the speed (tempo) of playback
Press the [TEMPO] switch, and then press the
[+/UP] or [–/DOWN] switch to adjust the tempo
which is displayed in the LED display (see page 10).
Adjusting the tempo of the song will not affect the
pitch.
Changing the sound
You can playback with a different sound than when
you recorded. Press the Sound selector to select the
sound with which you want that part to play. How-
ever if you have pressed the Sound selector during
recording to switch sounds, the sound selected
during recording will be selected automatically at that
point during playback.
Notes when a layer is selected
• If you select a layer, the musical data of the next-
numbered part (i.e., part 2 if part 1 was layered)
will no longer be played back, and it will not be
possible to select that part. When you cancel the
layer, it will be possible to playback and select
that part.
• Layering is not possible when part 16 (or part 15,
if the bell is selected for the metronome) is
selected.
• The two layered parameters will use the same
MIDI channel. This means that if a MIDI
program change message is received, both parts
will switch to the same sound.
2
3
4,5
1