Vfp28In Log Placement - Empire Comfort Systems VFP28IN3 L Series Installation Instructions And Owner's Manual

Before you begin: Do not, handle these logs with your
bare hands! Always wear gloves to prevent skin irritation.
After handling logs, wash your hands gently with soap and
water.
All Logs
The positioning of the logs is critical to the safe and clean
operation of this heater. Sooting and other problems may
appliance.
Warning: Failure to position the parts in accordance
approved with this appliance may result in property
damage or personal injury.
PROPER INSTALLATION SEQUENCE:
(Figure 27)
support.
burner pan.
burner pan.
5. Compare the completed log installation with the photo on
page 27. Review previous steps to make any necessary
adjustments.
6. Log placement is completed.
7. Attach log placement plate to cable holding lighting
instructions for future reference.
Attention: Do not use Figure 27 to order replacement logs.
Refer to Page 40 Parts List and Parts View to order logs.
Rock wool can be added to burners for a glowing ember
locations shown on Page 27. Replacement of loose material
embers) may adversely affect performance of the heater.
WARNING: All previously applied loose material must
be removed prior to reapplication.
8. Install front frame assembly.
Page 26

VFP28IN LOG PLACEMENT

Note: A single layer of embers is to be used when
with production embers) to the burner.
1
2
Figure 27
The following WARNING applies when log set is installed
onto an unvented gas burner assembly.
propane) gas. Field conversion is not permitted.
4
3
26497-6-0511